Betco LiquiShield Concrete Guard Betco LiquiShield Concrete Guard - Ready-To-Use - 128 fl oz (4 quart) - 4 / Carton - Water Based, Low Odor - Opaque White

• Scuff Mark Remover
• Black Mark Remover
• Soil Remover
• Stain Remover

Recommended for polished concrete and terrazzo surfaces for extended stain and etch protection. Clean entire area with Betco DensiClean, allow floor to dry prior to application. Apply Betco LiquiShield at proper application rate, 3,000 to 4,000 sq. ft. per gal, with a low-pressure sprayer spread with a microfiber applicator pad or mop and bucket application. Allow to dry to touch, 45 to 60 minutes, then apply second coat using the same procedures. Allow second coat to dry 60 minnutes then high speed burnish with Betco Si Burnish Pad. Allow 1 to 2 hours cure time before floor is exposed to full traffic. Allow 24 hours before the use of cleaners on the floor. Maintain floor with Betco Crete Rx DensiClean and Betco Crete Rx Cleaning Pads for maximum protection and shine.

• Water Based
• Low Odor